Remove and reinstall four wheels and rear brake drums to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front ( %) Rear ( %) Torque wheels to factory specs.
Replace front brake pad linings and inspect front brake disc rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Install front wheels & torque to factory specs. Road test vehicle.
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Karen S. gave our service a 5 star review on 9/13/2022
Drain & Refill Engine Oil. Replace engine oil filter. Lube all greaseable joints. Refill with Full Synthetic oil up to 5 qts. Check all other fluid levels under hood. Perform 25 point visual safety inspection.
Remove all tires and rotate rear tires to front and front tires to rear. Torque lug nuts to manufacturers spec.
Larry C. gave our service a 5 star review on 9/1/2022
Lubricate chassis if vehicle has grease fittings. Change engine oil and oil filter. Check air filter. Check all fluid levels under hood and tire pressures. Perform 25 point visual safety inspection. Replace up to 5 qts of Oil.
Liz D. gave our service a 5 star review on 11/11/2020
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Low beam HEADLAMP ASSEMBLY – Remove & Replace – Both Side – [Includes: R&I Bumper Cover. ]
N.J. State Inspection Pass or Fail
Replace front brake pad linings and inspect front brake disc rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle.
Stephen N. gave our service a 5 star review on 5/29/2020